Professional Hunting Gear Manufacturer & Tactical Gear Supplier Since 2013

How Do You Carry a Rangefinder and Binoculars While Hunting?

2026-11-06

Short answer: Binoculars go in a chest harness, the rangefinder goes in its own pouch on the harness wing or on your belt — not in the same pocket, and not on a neck strap. A chest rig holds the binoculars flat against your chest for one-handed glassing, and a 6 in rangefinder pouch with a magnetic closure lets you range a target and stow it without looking down. Add a 6.7 in bear spray pouch on the opposite hip and the kit rides without a strap around your neck.

Where each item should ride

Item	Best position	Why
Binoculars	chest harness main pouch	one-hand access while glassing
Rangefinder	harness wing or belt	range without moving the binoculars
Bear spray	opposite hip, cross-draw	reachable with either hand
Calls, licence, gloves	pouch under the bino pack	keeps bulk off the harness

How Do You Carry a Rangefinder and Binoculars While Hunting? 1 — 905-016 rangefinder pouch — magnetic control closure, rangefinder strap, 500D nylon and a wing aisle for a bino harness; 6 × 3.3 × 2.4 in outside, 3 × 3.1 × 2.8 in storage

What to look for in the pouches

Magnetic closure. Quiet, one-handed, and no zip to fumble when a bull steps out — the 905-016 uses a magnetic control closure.
A tether. A rangefinder dropped from a treestand is a rangefinder lost; specify a strap inside the pouch.
Harness compatibility. A wing aisle threads the pouch onto the bino harness so it sits beside the binoculars instead of swinging from the belt.
MOLLE and belt loops. For hunters running a waist pack, the same pouch should mount on webbing — the 905-021 bear spray pouch takes MOLLE as well as a loop and buckle.
Shell fabric. 500D nylon holds its shape, resists burrs and stays quiet enough for close cover.
Size to the device. The 905-016 takes a rangefinder up to 3 × 3.1 × 2.8 in internally; check your model before ordering.

How Do You Carry a Rangefinder and Binoculars While Hunting? 2 — The modular optics system in Range Green and ABT camo — 905-018 bino harness, 905-017, 905-020, 905-016 rangefinder pouch and 905-021 bear spray pouch

Building the kit as one system

A harness, rangefinder pouch, utility pouch and spray pouch that share the same webbing keep the load symmetrical and stop anything dangling. Keep the heavy item — the binoculars — centred on your chest, put the rangefinder on your bow-hand side if you range before you draw, and carry the spray on the opposite hip so a draw never crosses your body.

Why brands source optics pouches from GAF OUTDOOR

One factory builds the harness and every pouch that clips to it: 10+ years of OEM/ODM, 20+ designers, 20 production lines and an in-house test lab, so webbing alignment, magnet strength and stitching are checked as a set. Custom runs from 300 pcs per colour, private label from 50 pcs, stock from 5–8 pcs, with 7–15 day samples, 45–65 day bulk and Range Green or ABT camo stock colourways.

Next step: see the binocular harness range or send us your device dimensions.

Do You Need a Hunting Waist Pack or a Backpack?

Waist pack vs day pack vs frame pack

	Waist pack	Day pack	Frame pack
Typical capacity	2–6.5L	18–40L	40–120L
Weight sits	on the hips	shoulders and hips	hips, on a frame
Access while seated	yes	no	no
Sweaty back	none	yes	yes
Carries a harvest	no	limited	yes, with a load shelf
Best for	driven hunts, turkey, treestands	one-day hunts	multi-day and pack-out

The 6.5L waist pack worn with its detachable shoulder harness in a bow-hunting scene — whisper-silent brushed tricot shell, detachable harness and Western big game pocket layout

Why hunters carry a waist pack

Silence first. A brushed tricot shell is the quietest face fabric we stock — no rustle when you turn to call or reach for a rangefinder.
A detachable harness. The shoulder harness spreads the load on long walks and removes in seconds when you want a plain fanny pack.
Access when sitting. Everything sits in front of you, which matters in a treestand or a blind.
No sweaty back. Nothing presses against your spine on a warm stalk.
Waterproof options. Our 906 range includes 4L waterproof waist packs (906-022, 906-024, 906-025) plus 10L, 15L and 16L bags in the same series for wet hunts and wading.

Waterproof 906 series — 906-020 16L, 906-021 15L, 906-022 4L, 906-023 10L sling, 906-024 4L and 906-025 4L waist packs

What to specify on an OEM waist pack order

Capacity tiers. 4L covers calls, a phone and a bottle; 6.5L adds a rangefinder, gloves and a snack.
Harness type. Belt only, or belt plus a detachable shoulder harness — say which on the tech pack.
Pocket layout. Purpose-built pockets for Western big game differ from upland bird or turkey layouts.
Fabric and hardware. Brushed tricot, 500D nylon or TPU-faced shells, with YKK zippers and Duraflex buckles.
Waterproofing claims. On a sealed waterproof waist pack the airtight zipper is the rated component — that is not the same as a rating for the whole bag.
Order terms. Custom from 300 pcs per colour, private label from 50 pcs, stock from 5–8 pcs, with 7–15 day samples and 45–65 day bulk production.

Why brands source waist packs from GAF OUTDOOR

Waist packs, day packs and frame packs are built on one platform: 10+ years of OEM/ODM, 20+ designers, 20 production lines and an in-house test lab, backed by a 12-month warranty and FOB or DDP terms.

Next step: see the waterproof waist pack or send us your capacity and pocket list.

Do Hunting Backpacks Come With Rain Covers?

Short answer: Not always. Some hunting packs ship with a cover stowed in a pocket or under the lid, some rely on a DWR water-repellent finish alone, and a few are welded waterproof bags that need no cover at all. In our range, the 40L 500D Cordura bow day pack and the 85L carbon-frame pack both ship with a cover, and the 905-018 bino harness pack is supplied with one. Custom runs start at MOQ 300 pcs.

The three levels of wet-weather protection

	DWR finish	Rain cover	Welded waterproof bag
What it handles	light rain, snow, splash	steady, all-day rain	submersion, river crossings
Where it lives	on the fabric itself	in a pocket or under the lid	the bag construction
Weak points	wets out over long exposure	wind, and it must fit the load	heavier, less internal organisation
Typical use	most hunting days	waterfowl, float trips, long sits	boat, canoe, wading

The 40L PRO 2200 day pack with the rain cover pulled over a slung rifle — a. carrying shooting tools, b. covered with the rain cover

What a rain cover has to cover

The load, not just the pack. A cover cut for an empty 40L pack will not stretch over a bow carrier, a rifle sling or a loaded meat shelf — specify it against the pack's maximum dressed size.
Where it lives. A cover sewn into the base or lid gets used; a loose cover left at home does not.
The zips and the lid. Water runs down the top first, so ask whether the seams are taped or sealed.
Attachment. An elastic hem plus a clip keeps the cover on in wind.
Visibility. A high-visibility cover is safer in low light; camo suits open-country hunting.

Rear panel of the same 40L pack — handle, airflow padding, chest belt, hip belt and hip belt pocket

What to specify on an OEM rain cover order

Shell fabric. 500D Cordura nylon with a DWR face, or a nylon body with a DWR + PU coating; brushed tricot shells take a DWR + TPU bond.
Be precise about waterproofing. A DWR finish repels rain but is not a waterproof construction, and even an IPX7 airtight zipper is rated as a component, not as a rating for the whole pack.
Fit and packing. State the pack's loaded volume, whether the cover must clear a bow or rifle carrier, and whether it packs into its own pocket.
Order terms. Custom covers from 300 pcs per colour, 50 pcs for private label on an existing design, 7–15 day samples and 45–65 day bulk production, FOB or DDP.

Why brands buy wet-weather gear from GAF OUTDOOR

Pack and cover are built on the same line: 10+ years of OEM/ODM, 20+ designers, 20 production lines and an in-house test lab, so cover fit, seam sealing and zipper performance are checked before shipping — backed by a 12-month warranty.

Next step: tell us your pack volume and how you hunt and we will specify the cover to match, or see the waterproof dry bag range.

How Much Weight Can a Hunting Backpack Carry?

Short answer: There is no single number, because the limit is set by the frame and the suspension, not by the fabric. As a working rule, a frameless day pack is fine for a light day load, while a framed pack with a proper hip belt carries a multi-day load plus a deboned harvest. Our carbon-fibre frame platform spans 30L to 120L, and the lightweight aluminium-frame pack ships with a 150 lbs (68 kg) meat bag.

What actually sets the limit

Part	Why it decides the load
Frame	The spine of the pack. Carbon fibre stays light; aluminium takes repeated meat hauling at lower cost.
Hip belt	Transfers most of the weight to the pelvis, so the shoulders carry only a fraction.
Load lifters and shoulder straps	Fine-tune how close the load sits to your spine.
Fabric	500D Cordura nylon and 500D/1000D nylon resist abrasion — but denier alone does not create capacity.
Hardware and stitching	YKK zippers, Duraflex buckles and bar-tacked seams are what fail first when a pack is overloaded.

Our frame platforms at a glance

Platform	Frame	Sizes	Suited to
Frameless day pack	none	18L–35L	fast day hunts, light gear
Carbon-fibre frame pack	carbon fibre	30L–120L	long approaches, multi-day big game
Aluminium frame pack	aluminium	65L–85L	heavy, repeated meat hauling

A load figure only means what it was tested for. The 120 kg rating on our 30L stool pack, for example, applies to the metal seat frame, not to the pack body. Ask what a number refers to before you pass it on to your own customers.

85L carbon-fibre frame pack — carbon-fibre frame for load transfer, gun and bow carry, meat bag system and a built-in rain cover

Four rules for carrying a heavy load

Keep dense items high and close to the spine, between the shoulder blades, not at the bottom of the bag.
Tighten in order: hip belt first, then shoulder straps, then load lifters. If the pack sags, the frame is not sitting on your hips.
Use the load shelf. Strapping a deboned harvest between the bag and the frame lowers the centre of gravity and stops it swinging.
Plan for two trips. A 150 lbs meat bag describes the bag's capacity; walking out with that much in one go is the hunter's decision, not the spec sheet.

Getting the weight onto the hips on a forest stalk — a fully loaded hunting pack carried through autumn timber

Why brands source load-bearing packs from us

We build the frame, the bag and the carry system under one roof: 10+ years of OEM/ODM, 20+ designers, 20 production lines and an in-house tensile-test lab, so load-bearing seams, webbing and buckles are checked before shipping. Custom OEM runs from 300 pcs per style, private label from 50 pcs, stock from 5–8 pcs, with 7–15 day samples, 45–65 day bulk production, FOB or DDP, and a 12-month warranty.

Next step: send us your target capacity and load and we will recommend the frame and suspension to match, or see the hunting backpack range.

What Is a Bow Case and How Do You Choose One?

Short answer: A bow case carries the bow and nothing else. Its job is to protect the cams and string from knocks, and get the bow onto your back so your hands stay free. Two families cover it: a padded soft sleeve with a sling, which is what you carry in the field, and a hard travel case, which is what you fly with. Our 1944 is the soft kind — 38 in, brushed tricot shell, padded single-shoulder sling and a quick-release buckle.

The three ways to carry a bow

	Soft bow sleeve + sling	Hard travel case	Bow pocket on a hunting pack
Carries	Bow only	Bow plus accessories	Bow inside the pack
Protection	Padding against knocks	Rigid shell against impact	Padding, plus the pack around it
Hands	Free, sling on shoulder	Free, fixed handles	Free
Access	One clip	Latches	Open the pack
Airline travel	Not designed for it	The right choice	No
Best for	Walk-in, tree stand, stalking	Flying, off-season storage	Spot and stalk, one-load carry

GAF OUTDOOR 1944 bow case — 38 in camo padded sleeve with a brushed tricot whisper-silent shell, olive end caps, buckle closure and a padded single-shoulder sling

What to check before you buy or specify

Length against your bow. Measure axle-to-axle and overall length, then compare with the case size rather than the bow's advertised class.
Padding at the cams. The cams and the string are the parts you cannot repair in the field; ask where the padding is thickest.
A quiet shell. Brushed tricot runs silent against brush and clothing, which matters more on a bow case than on any other bag.
The sling. A padded, quick-adjust sling is what makes the case wearable for a mile, not a hundred metres.
Closure and access. A single quick-release buckle gets the bow out in seconds; zip closures are slower but hold the bow more securely.
Weather. A water-repellent face is enough for most days; ask for a coated shell if you hunt in sustained rain.

GAF OUTDOOR 1944 bow case carried in the field — the camo sleeve slung across the hunter's back in autumn timber

Case or pack — which comes first

If you already carry a bow hunting backpack with a bow pocket or side carrier, the case is for transport and the off-season, not the hunt. If you walk in with the bow on your shoulder and put a small day pack on your back, the sleeve is the item you actually need. Many bowhunters end up with both; the sleeve is the cheaper half.

Why brands source bow carry from us

GAF OUTDOOR has 10+ years of OEM/ODM experience and 50+ brand customers in the US, Europe and Australia, from a 3,300 ㎡ plant with 20 production lines and 350+ staff. Bow sleeves, bow packs and bow carriers are built on the same brushed-tricot, camo and hardware platform as our hunting packs — sample in 7–15 days, custom OEM from 300 pcs per style, branding an existing design from 50 pcs.

Next step: see the hunting accessories range, or send your bow's overall length and we will match the case size.

What Is a Floating Gun Case and When Do You Need One?

Short answer: A floating gun case is a welded, fully waterproof case — sealed seams, a waterproof closure and a body designed to stay on the surface if it goes over the side. It is right when you hunt from a boat, wade to a blind or cross water, and wrong when you fly with a rifle. Our 2015 model uses welded waterproof fabric with a full-length waterproof zipper, two cinch straps and a laser-cut MOLLE panel.

Floating case vs soft case vs hard case

	Floating welded case	Padded soft case	Hard case
Water	Sealed body, floating design	Water-resistant fabric only	Weather-resistant, not sealed
Impact	Padding only	Padding	Rigid shell
Airline travel	Not designed for it	Not designed for it	The right choice
Attachment	MOLLE panel and cinch straps	Sling	Fixed handles
Best for	Boat, wade-in, flooded timber	Truck, blind, day hunts	Flying, long-haul

GAF OUTDOOR 2015 floating waterproof gun case — welded olive body with a full-length waterproof zipper, two cinch straps, grab loops and a laser-cut MOLLE panel

What to check before you buy or specify

Welded, not sewn. Ask whether the body is welded or stitched. A sewn and taped case is water-resistant; a welded case is the one that keeps water out.
Closure type. A full-length waterproof zipper gives fast access; a roll-top gives a simpler seal but slower handling. Match it to how you use the case.
Cinch straps. Two straps let you compress the case around the gun so it does not shift, and they double as lashing points on a boat.
Buoyancy in writing. Ask the supplier for the buoyancy and sealing specification rather than trusting the word "floating" on a product title.
Length and fit. A waterfowl case usually takes a longer, scoped gun — measure muzzle to buttstock with the choke tube fitted, and check the case against that number.
Attachment. A MOLLE or laser-cut panel lets the case ride on a pack or a blind frame instead of in your hands.

GAF OUTDOOR 2015 floating gun case detail — the full-length waterproof zipper open with the stock of a shotgun in place, plus the laser-cut MOLLE panel and ID window

It is not just the gun

On a waterfowl hunt the gun is one of several things that must stay dry. The same welded construction runs through our dry bags: a 37 L 840D nylon camo TPU dry backpack and a 50 L / 100 L floating waterproof duffel, both built with an IPX7 airtight zipper on a submersible body.

Why brands source waterfowl gear from us

GAF OUTDOOR has 10+ years of OEM/ODM experience and 50+ brand customers in the US, Europe and Australia, from a 3,300 ㎡ plant with 20 production lines and 350+ staff. Floating gun cases, dry bags and decoy bags come off the same welding and camo platform, so a waterfowl line can be sourced in one place — sample in 7–15 days, custom OEM from 300 pcs per style, branding an existing design from 50 pcs.

Next step: see the gun bag range, or send your barrel length and hunting conditions and we will match the case.

How Do I Choose a Bow Hunting Backpack?

Short answer: A bow hunting backpack has to do one thing a rifle pack does not: carry a compound bow hands-free without the cams or string dragging through brush. Three decisions cover it — where the bow rides (inside the pack or on a side carrier), capacity (20–40 L covers spot and stalk and tree stands), and how quiet the shell is. Our bow packs run from a 20 L day pack to an 80 L carbon-frame model.

Where the bow goes

	Bow inside the pack	Bow on a side carrier	Separate bow case
Hands free	Yes	Yes	No — carried separately
Access	Open the pack	Release the carrier straps	Immediate
Protection	Bow enclosed	Bow exposed	Highest
Best for	Walk-in, tree stands	Spot and stalk	Transport and travel

The 905-060 20 L does both: the bow stores inside the pack and the arrows are secured on the side, so the whole rig is ready when you reach the stand.

Capacity ladder

Capacity	Model	Suits
20 L	905-060	Spot and stalk, half-day hunts
30 L	30 L bow hunting pack with bow carrier	Full day, tree stand
40 L	1933 — 500D Cordura, aluminium frame, Bow & Rifle Carry System	Full day plus layers; bow or rifle
65 L	Carbon external-frame pack with bow carrier	Multi-day hunts
80 L	Carbon frame bow pack with bow carrier	Backpack bow hunts

GAF OUTDOOR 905-060 20L bow hunting backpack — bow stored inside the pack with arrows secured on the side, flat-open design and a large main compartment plus quick-access side pockets

What to check before you buy or specify

Bow carry position. Inside the pack protects the cams on a walk-in; a side carrier is faster to draw from in a spot-and-stalk setup. Decide from the hunt, not the catalogue.
Retention points. Count the straps and cradle points. Two straps hold a bow; two straps plus a bottom cradle hold it securely.
Cam and string clearance. The bow must sit so nothing presses on the cams or the string — a structural decision, fixed in the technical pack.
Quiet shell. Bow hunting is a close-range game. Brushed faces are quieter than ripstop, and low-silence zippers remove the second loudest sound a pack makes.
A tree-stand hook or lashing loop. On a stand the pack gets hung, not worn — our packs carry attachment loops for exactly that.
Flat-open access. A pack that opens fully flat means you reach everything without unpacking it on a platform.

GAF OUTDOOR 905-060 20L pack in use — bow hunting in a tree stand, with the pack hung on the tree and the bow drawn

Why brands source bow packs from us

GAF OUTDOOR has 10+ years of OEM/ODM experience and 50+ brand customers in the US, Europe and Australia, from a 3,300 ㎡ plant with 20 production lines and 350+ staff. Bow carry systems, camo, hardware and quiet shells come off the same platform as our rifle packs — sample in 7–15 days, custom OEM from 300 pcs per style, branding an existing design from 50 pcs.