A bag range is usually a list of products. The LY2300 is a system: seven models, from a 2 L waist pack to an 18 L backpack, on one 1680D waterproof composite shell, one airtight zipper and one PP thickened woven tape.
That repetition is the argument: one material story covers waist, shoulder and back positions, and one colour approval serves all seven.
It is also a trap. Sorting by capacity says which bag is bigger, not which is overbuilt, which is leanest per litre, or which two models split the same sale.
The shared specification is three lines long on every sheet in the family: 1680D waterproof composite material, an airtight zipper, PP thickened woven tape. The formats differ: five waist packs at 2 L, 3 L, 4 L, 4 L and 5 L, one 15 L shoulder sling, and one 18 L backpack with shoulder straps and a side mesh pocket.
A nine-fold capacity spread and a 3.5-fold weight spread over one cloth has practical value. Colour is approved once, a QC sheet written for the 18 L works on the 2 L, and a leaking closure gets one corrective action instead of seven.
The risk is that a shared shell hides a shared weakness. Sample the extremes first: the 2 L has a short zip with tight radii, the 18 L a long zip with far more seam length to seal.
Figures come from the printed dimension sheets; the last column is derived.
| Model | Format | Capacity | Weight | Dimensions (cm) | kg per litre |
|---|---|---|---|---|---|
| LY2301 | Waist pack | 2 L | 0.374 kg | 22 x 12 x 7.5 | 0.187 |
| LY2302 | Waist pack | 4 L | 0.497 kg | 28 x 16.5 x 9 | 0.124 |
| LY2303 | Waist pack | 4 L | 0.497 kg | not printed on the sheet | 0.124 |
| LY2304 | Waist pack | 5 L | 0.627 kg | 30 x 20.5 x 9.5 | 0.125 |
| LY2305 | Shoulder sling | 15 L | 0.791 kg | 38 x 36.5 x 13 | 0.053 |
| LY2306 | Waist pack | 3 L | 0.413 kg | 23.5 x 15.5 x 8.5 | 0.138 |
| LY2307 | Backpack | 18 L | 1.305 kg | 50 x 32.5 x 14.5 | 0.073 |
LY2302 and LY2303 share capacity, weight and material list but are different bodies: the LY2303 sheet shows a mesh pouch with a drawcord, annotated as able to hold a water bottle, while the LY2302 shows a plain front with the tape panel. The LY2303 sheet prints no length, width or depth, so that cell stays blank rather than estimated.
Absolute weight sorts the range by size. Weight per litre sorts it by how much structure each model carries for the volume it offers, and that is the number worth putting in front of a buyer.
The 2 L waist pack is heaviest at 0.187 kg per litre. The 18 L backpack, at 1.305 kg, sits at 0.073, and the 15 L sling is leaner still at 0.053. The biggest bags are the most efficient per litre and the smallest is the least.
The reason is fixed mass. A closure of a given specification, a buckle set, a length of PP tape, a padded panel and a seam allowance do not shrink when the pattern shrinks. A 2 L body still needs a full slider, a sealed zip, a belt and its buckle, so roughly the same hardware is spread over a fifth of the volume. The 15 L and 18 L add a strap and back panel, but once, diluted by volume.
That changes how a reduction is negotiated. Taking 100 g out of the 18 L means removing structure the format needs; taking 100 g out of the 2 L means changing a buckle, slider or tape width, a specification decision rather than a diet.
Use the ratio as a screen, not a score. A high figure on a small format is expected; a high figure on a large format would be the warning sign, because volume there is cheap. No model here shows that pattern.
Capacity on a soft bag is nominal. It describes a fill, not a geometric certainty, so the printed number is a SKU label, not a specification.
The LY2305 shows why: marked 15 L with an external footprint of 38 x 36.5 x 13 cm, its box holds about 18 litres, so the claim sits at roughly 83 percent of the envelope, plausible for a panelled body. The same check on the 2 L at 22 x 12 x 7.5 cm gives about 1.98 litres, so its capacity equals the entire envelope. Both numbers can be honestly printed, but not by the same method.
The consequences are practical: litres alone cannot compare usable space, because the small models are labelled close to their envelope and the large ones well inside it, and a label that prints litres on a hangtag inherits the ambiguity. The fix is procedural: state the convention, say whether dimensions are external or internal, and require a fill test on the approval sample.
The test needs no laboratory: pack a documented load and photograph it with the list attached. A compact camera, a phone, a wallet, keys and a folded shell for the 5 L; the same plus a layer and a bottle in the mesh pocket for the 15 L. If it closes without strain and the load sits below the zip line, the figure is defensible.
Every model closes on an airtight zipper. The slider compresses a seal along its whole length, so the pull is firmer than a standard zip and, on a small body, needs two hands.
On the 18 L backpack the effort is easy to accept: it opens at the start of a trip, at lunch and at the end. A 2 L waist pack is different. It is worn by someone reaching for a leader spool, pliers or a phone, and if every access means parking the bag and working the slider, the user will leave it part-open, which defeats the purpose, or move the item to a pocket that is easier to reach.
The pattern answers this. The waist models carry a secondary zippered pocket on the face and a run of PP tape loops across the front, so the items that need speed sit outside the sealed compartment. The 15 L sling repeats the idea with the zip along the side of the body and the tape panel carrying the strap hardware.
Selection follows access frequency. A model opened many times an hour should keep its reserve in the sealed compartment, not the item in constant use; a model opened twice a day can seal the whole load. That argues for the 2 L and 3 L as secondary bags and the 15 L and 18 L as primary ones.
Seven models do not need seven slots. They need three shelf positions and a decision about which model anchors each one.
The waist band runs from 2 L to 5 L across five models. The 2 L is the minimal belt bag, the 3 L adds a full length front pocket for a phone and a small tool kit, the 5 L carries a compact camera and a layer, and the two 4 L models sit between them with identical capacity and weight but different front detail. Stock both only if the bottle pouch is a visible selling point; otherwise one of them splits the same sale.
The sling sits alone in the range. The 15 L is a full day bag on a single wide strap and the leanest model per litre, which makes it the volume leader where slings sell better than backpacks. It does not replace a backpack: it carries a day load on one shoulder by design, and a buyer who wants a two shoulder carry has to step up to the 18 L.
The 18 L holds the backpack position, the only model with two shoulder straps, a side mesh pocket and a 50 cm body, and the one most likely to be set down in water, which justifies the airtight closure most clearly.
An assortment of five, the 2 L, 3 L and 5 L waist packs, the 15 L sling and the 18 L backpack, covers all three positions without overlap; the 4 L models are an optional extension.
All seven share three headline materials, which is why the confirmations must be specific. 1680D waterproof composite material names a yarn size and a material class, not a construction: layer structure, coating or film, and weight per square metre are separate facts the sheets do not print.
The closure and trim need the same treatment. A zip has a brand, a model and a grade, which a replacement part must match two seasons later, and a PP tape thinner than the approval sample will roll where it passes through a buckle.
| Item | What to confirm in writing | Why it decides the order |
|---|---|---|
| Shell fabric | Weight per square metre, layer structure, coating or film | 1680D alone does not define hand or colour depth |
| Closure | Zipper brand, model, grade, slider type | Governs resistance and spare-part matching |
| Tape | PP tape width and thickness, stitch pattern | Thin tape rolls at buckles and reads as cheaper |
| Hardware | Buckle and fastener brand, material, finish | First parts to fail, first parts a customer notices |
| Colour | Sealed approval swatch for Black and Green, daylight check | Two colourways across seven models, one reference each |
| Seams | Which are stitched, which welded or heat sealed | Water enters at the seam before the shell |
| Dimensions | External or internal, plus the capacity convention | Keeps the seven printed figures comparable |
| Samples | Smallest and largest model with a documented fill load | The extremes stress the construction differently |
Keep one approval file for the family rather than seven, and inspect the extremes on every lot: the 2 L for tight radii, the 18 L for seam length and strap attachment.
Treat the LY2300 as one material platform with seven formats and sourcing becomes a sequence rather than seven negotiations.
Approve the 2 L and the 18 L first. They test the shell at both ends of the radius and seam-length range, and a component approved there holds across the five between them. Then fix the three shared components in writing: fabric weight and layer structure, zip brand and grade, tape width and thickness.
Choose the assortment by capacity, not by count: the five-model set covers waist, shoulder and back without duplication. Add a 4 L waist model only if its front detail earns shelf space.
Then settle what the sheets leave open. Ask for the LY2303 dimensions, which are not printed, and for the dimension and capacity convention that applies to all seven. Use weight per litre to sanity-check rather than rank: 0.187 on the 2 L and 0.053 on the 15 L are both correct for what those formats must do, and a buyer who knows why will specify the right bag for each shelf instead of the largest one that fits the fixture.
july